Solar & Renewable EnergyB-Trac Engineering Limited offers a complete solution for photovoltaic integration and connection including power conversion (Solar Panel, inverters, transformers and switchgear, Frame Structure), Commercial Grid Tied Project, Mini Grid Project, Solar Irrigation Project, electrical distribution, monitoring, supervision and technical support. B-Trac provides the full solution from the panel DC output to the grid connection.
- Solar Project based Solution
Solar Irrigation Pumping Solution
Solar Drinking water pumping Solution
Centralized commercial grid-tie solar solution
Decentralized commercial grid-tie solar solution
Commercial Self Consumption of Solar Power Solution
Commercial Off-Grid Solar Power Solution
Commercial Solar Backup Power Solution
- Spare and Parts
Solar Panel (European, China)
Pump and Motor Controller
Grid Tied Inverter
Off Grid Inverter
MPPT Charge Controller
In Bangladesh, where agriculture is the base of the economy, though till date many of the areas where land is very fertile, but due to the unavailability of the Electric Supply Irrigation is almost impossible or very costly. To overcome this problem of the farmers we are introducing our solar water pumping system at a very affordable cost with high reliability. Solar water pumps are specially designed to lift water for irrigation, horticulture farms, gardens, domestic use, drinking and other similar applications. AC transformer less inverter system Altiver 312 pump controller has 3-phase, 400/200 output voltage and V/F Control to manage pump starting condition (Soft Start). The equipment is micro controller based and operated with software for digital control of inverter parameters, fault finding diagnostics and digital I/O signaling. AC transformer less inverter system Altiver 312 pump controller has 3-phase, 400/200 output voltage and V/F Control to manage pump starting condition (Soft Start). The equipment is micro controller based and operated with software for digital control of inverter parameters, fault finding diagnostics and digital I/O signaling.
Special Attractions of our Solar AC Water pumping system:
- Altiver 312 ( Schneider ), pump controller is suitable for all IEC three-phase asynchronous motors
- Inbuilt MPPT tracking facility to get maximum power output from the solar Array.
- Higher Efficiency.
- Sensor less Dry Running Protection
- Higher Life Cycle.
- Higher Temperature Protection.
- Reverse Polarity Protection
- Tank over flow protection
- Over voltage protection
- Under voltage protection
- Over Load Protection
- High Durable and Reliable
- Solar Panel: IEC 61215 & IEC 61730 Certified solar panels with 25 year life.
- AC Motor + Pump: High life cycle pump with High efficiency and better discharge.
- Solar AC Pump Controller: Transformer less high efficient and micro controller based pump controller of Schneider Brand.
- Module mounting structure: Galvanized Iron Mounting Structure with Fixed/ Dual Axis manual tracking facilities for long time operation in a day.
- Accessories: Cable, Connectors, Pipe and Other Accessories.
- Others:Water aquifer, Buried pipe line, pump House, Header Tank, Fencing Advantages
- Irrigation possible at remote locations
- Environment friendly operations
- Conventional grid electricity is not required
- Highly reliable and durable
- AC High Efficient Motor + Pump
- Eco-friendly (Zero Noise Pollution- Zero CO2 Emission)
- Complete Independence from grid connection for water supply
- 25 years power output warranty on the SOLAR PANELS
- 5 Years replacement warranty of pump controller
- No fuel required
- Almost no maintenance required
- Provide consistent water
In a large commercial system, the centralized architecture offers the best LCOE (Leveled Cost of Electricity). Leveraging its expertise in power conversion, low and medium, voltage protection, and SCADA and automation, B-Trac has a comprehensive, cost-effective and highly modular solution package for the balance-of-system of a PV Plant. B-Trac provides differentiated value to its customers through seamless integration of its solution bricks, country wide multi-skill services and capabilities to engineer the most complex plant-level controls. Depending on the size of the project, large commercial photovoltaic systems can be designed using a power conversion substation, like Schneider Electric’s (Technical Partner of B-Trac) PV Box, or with central inverters. B-Trac also has a range of outdoor rated UL inverters for large commercial buildings connected to LV networks.
Decentralized commercial grid-tie solar solution includes:
In a commercial rooftop photovoltaic system, multiple string inverters are connected to an AC combiner box, and then connected directly to the low voltage grid, or to the medium voltage grid via LV/MV transformer and switchgear. Using three phase string inverters, customers can benefit from faster installation and minimal system downtime due to short replacement lead time and ease of servicing. Also the optimized design approach around standard building blocks can allow customer scale project sizes up and down with ease.
Commercial Self Consumption of Solar Power:
Enabled by Priority Power Conext XW+ will prioritize the self-consumption of stored battery and PV generated power before purchasing grid power, helping business owners avoid high utility charges. XW+ will also provide for backup in areas prone to grid outages. Conext XW+ takes it one step further by enabling excess PV power to be sold using Grid Sell Coupling the PV system to the battery bank with Conext MPPT Solar Charge Controllers is the most efficient and economical method for self-consumption and for storing PV power. Both Conext XW+ and SW will also charge the battery bank from the grid if solar irradiation is insufficient. Batteries and Solar PV can be scaled up as needed. There are two main applications for Parallel Power. Grid Boosting: Conext XW+ and SW can supplement the grid input with extra power to support large loads, temporarily boosting power within a building with a limited grid supply. Conext XW+ can limit the power draw from the utility connection by adding power above a set point to support large temporary loads, helping avoid peak usage charges.
Commercial Off-Grid Solar Power Systems:
For off-grid businesses power consumption is typically heaviest during the day when PV production is highest. If there is night time consumption, PV energy must be stored for later use. AC Coupling the PV system with the Conext XW+ is a simple and cost effective method of providing power for business activities during the day. Sizing the PV system at up to two times the rated inverter/charger power allows for loads to be powered and battery charging to occur simultaneously during the day. Over production of PV energy is curtailed by Conext XW+. DC Coupling the PV system with the Conext XW+ using Conext MPPT Solar Charge controllers is also an option. Conext XW+ will provide power for the AC loads and can also charge the battery bank from diesel generator power. The off-grid diesel generator is used as backup to PV and to extend autonomy. Batteries and Solar PV can be scaled up as needed for the required autonomy. ComBox and System Control Panel are both used for monitoring and control.
Commercial Solar Backup Power Systems:
Conext XW+ integrates into the electrical system and seamlessly converts power from battery reserves to power critical loads such as pumps, security systems, refrigerators and electronics, when utility power is unavailable. Three Conext XW+ units are used to provide three-phase power. For extended power outage situations, Conext XW+ integrates with a generator to power critical loads while replenishing battery reserves.